Shaoxing Yihan Textile Co., Ltd. is a custom Mesh Fabric manufacturer in Keqiao, China. We operate a knitting factory with dyeing and finishing in the same facility, so mesh programs can move from grey fabric to finished color without multiple handoffs. Within our Outdoor Sports Fabric family, this mesh range supplies the open, breathable constructions used in clothing, outdoor sportswear, yoga wear, school uniforms, linings and accessory mesh.
Mesh Fabric Range and Application Fit
Our mesh offer is built on an imported machine base of more than 100 double-sided big round machines and 80 single-sided machines. We knit in 34-inch and 38-inch diameters with 24, 28 and 32 needles, which gives us direct control over the openness, weight and hand feel of the finished mesh. The constructions below are the most common starting points for mesh projects in our factory.
| Construction |
Typical Application |
Configuration Focus |
| Polyester Birdseye Mesh Fabric |
Sportswear, team wear, advertising shirts, linings |
Double-sided open cells; 100% polyester and cotton/spandex-style variants; balanced stretch and recovery |
| Air Layer Mesh |
Outerwear, breathable interlining, casual technical garments |
Spacer structure with light, soft hand feel and three-dimensional body |
| Custom Mesh Fabric |
Panels, pockets, shoes, bags, backing and decorative mesh |
Loop length, yarn, composition, color and finish developed from your sample or drawing |
Because mesh is knitted, the final performance is set as much by loop geometry and finishing as by yarn. We confirm these parameters on a development sample before committing to bulk production.
Critical Specifications and Customization
We treat mesh as a specified engineering textile rather than a stock commodity. The key choices are the needle gauge and cylinder diameter, the yarn composition, the finished weight and width, and the final dyeing or printing route.
- Machine platform: 34''/24, 34''/28, 34''/32, 38''/28 and 38''/32 needles, selected for the target openness and stability.
- Composition: mesh programs are commonly developed in 100% polyester or cotton/spandex-style blends, with broader composition options available across our knitted range.
- Dimensions and shade: target finished weight, usable width and color are fixed in the technical specification before production.
- Finishing: because dyeing and printing are inside our factory, color and finish can be aligned with the knitting order rather than handled as a separate external step.
Development can start from a physical sample, a drawing, or a reference to an existing spot cloth. Our R&D team uses the supplied sample or drawing to build the structure and confirm it before mass production. We also keep more than 100 spot cloth references in-house, which shortens the selection stage for projects that need a quick hand-feel comparison.
Quality Assurance and Acceptance
Quality control runs through the production route rather than only at the end. After each process step, our production team carries out inspections; the final piece is subject to full inspection according to customer requirements and international standards.
- Grey fabric checks after knitting
- In-process checks through dyeing and finishing
- Final piece inspection and shade/lot control before packing
- 24-hour after-sale response for any fabric issue
Production is managed to national quality-control standards, with attention to product safety and environmental performance in every batch.
Dyeing, Finishing and Delivery
Having dyeing and printing integrated in our factory means the mesh you receive is already in its final color and finish. This avoids the misalignment that can occur when a knitting mill and a separate dyehouse are managed independently.
- Grey fabric production, dyeing and finishing under one roof
- Sea export from nearby ports, with other transport options arranged by order
- Regular exports to Europe, the US and South America
For large programs, we confirm the production plan, packing scope and delivery schedule before order confirmation.
Information We Use to Configure Your Solution
To prepare a mesh fabric configuration and quotation, send us:
- End application and target performance, such as sportswear, uniform, lining or accessory
- Physical sample, drawing or reference number
- Required composition, finished weight, width and color
- Estimated quantity and target delivery window
- Any special testing, packing or labeling requirements
We normally respond to inquiries within 12 working hours with a clear proposal.
Mesh Fabric FAQ
Can you match an existing mesh sample?
Yes. Send a physical sample or a clear drawing and our R&D team will develop the structure. We confirm the mesh construction on a development sample before bulk production.
What machine specifications do you use for mesh?
We knit on 34-inch and 38-inch big round machines in 24, 28 and 32 needles. The gauge and cylinder diameter are selected from the target weight, openness and stability of the fabric.
Which materials can be used in mesh fabric?
Most of our mesh programs are in 100% polyester or cotton/spandex-style blends. If the hand feel of a different composition is required, we use the development route to match the target within our knitting and finishing platform.
How do you control quality on mesh orders?
We inspect after every production step and carry out a full final inspection according to customer requirements and international standards. Inquiries and after-sale issues are handled directly by our team within 24 hours.
What do you need from us to start a mesh project?
The application, a reference sample or drawing, the target composition and dimensions, the quantity and the delivery window. With those details we can prepare a configuration, development plan and quotation.
English 
中文简体 
